Small liquid filling and capping machine and laboratory
- DONGTAI
- SAHNDONG
- 15 WORKING DAYS
- 1000 SETS/IYEAR
The liquid bottle filling and capping machine is especially suitable for small-dose liquid filling and various round bottle caps, pump head caps, nozzle caps, duckbill caps, and spray gun lock caps.
Small liquid filling and capping machine and laboratory
Equipment principle:
This machine is a special filling equipment for reagent bottles, which can complete automatic bottle unscramble, bottle feeding, liquid filling, automatic cap sorting, cap wearing and cap screwing and sealing. The tubes are placed in the bottle unscrambler, arranged in rows by the unscrambler, and then sent to the aliquot plate one by one by the air cylinder. The aliquot plate makes an intermittent motion of 16 equal divisions, and the bottles rotate with the aliquot plate; when passing through the filling station , The filling head is filled twice; when it passes through the capping station, the cap is automatically put on the mouth of the bottle; after passing through the capping station, the capping head drops, and the cap is screwed on the bottle mouth. After the bottle is filled and sealed, it is pushed by the cylinder to the labeling conveyor belt, and then sent to the subsequent labeling station. Bottle unscramble and cap unscramble are completed by the vibrator, the filling is completed by the double-head peristaltic pump, and the labeling and feeding of the bottles are completed by the conveying motor on the labeling machine. Under the control of PLC, all agencies coordinate and complete various actions together.
Material | stainless steel |
Application | liquid |
Capacity | 30-40bottles/min |
Bottle Type | small bottle |
Powder | 220V/380V |
Air Pressure | 0.6-0.8Mpa |
Rate Of Work | 1.5kw |
Features and advantages
1. When the vial filling and capping machine fails, the machine will automatically stop.
2. Turntable positioning, convenient specification change, wide adjustment range.
3. The bottle can enter and exit smoothly, and the speed is controlled by frequency conversion
4. The magnetic moment cap is used for permanent use, and the torque is easy to adjust.
5. Use corrective equipment, make sure to tighten the lid.
6. Continuous work can complete automated work, save time and improve efficiency.
7. The structure is simple, easy to operate and maintain. The cap can be screwed with magnetic torque, and the tightness can be adjusted without damaging the cap.
